Compaq presario... lovely... ;)We had one witch the PSU burnt on, leaving us for buying a new from Compaq cos the PSU didn't have the usual standard, in fact nothing in the compaq was. XD(And the PSU was very expencive also.) So my guess is that you'll have problem fitting a standard PSU in the case, but you just have to find out, open the case and search for a sticker on the PSU. Is it easy to replace a PSU? Will this w ...
[QUOTE=''swehunt''] Compaq presario... lovely... ;) We had one witch the PSU burnt on, leaving us for buying a new from Compaq cos the PSU didn't have the usual standard, in fact nothing in the compaq was. XD(And the PSU was very expencive also.) So my guess is that you'll have problem fitting a standard PSU in the case, but you just have to find out, open the case and search for a sticker on the PSU. [/QUOTE] hey thanks i guess i will just have to look at teh PSU in it! I am replaceing teh PSu because it is weak and i need a stronger one for teh graphics card i am going to buy with it!
My family has a similar computer, i believe it is the sr5510f, anyway, if you open the case and look at the sticker on the psu, the brand is probably bestec, it should say atx on it along with a bunch of other numbers. Also you can just measure the width depth and height and compare it to other psus. Next check your motherboard and check that is atx or micro atx, im guessing micro atx. Lastly check how many pins the motherboard connector is, 20 or 24.
No comments:
Post a Comment